Online Shop
KV2 EX12 Extreme Resolution Active Speaker System (£ each) £2,587.50
Description
The EX12 further builds on the success of the EX6 and EX10 by implementing the revolutionary 3” NVPD large format ompression driver found in our flagship VHD range of products. This makes for one of the most perfectly balanced and accurate, compact, 2-way active boxes available on the market today. Complete on-board control courtesy of electronic crossovers, phase alignment, equalization and speaker protection all integrated into the EX12’s amplifier module.
Applications,
High quality fixed installations.
Portable PA Systems for AV, speech and multimedia playback.
Small to medium-sized Live Music applications.
Mobile DJ (when used with EX2.2 or EX2.5 Active Bass Module).
Floor monitoring applications.
R.R.P. £2,587.50
Our Price: £2,587.50 Inc VAT
Technical Specifications
- System Acoustic
- –3dB response 55Hz - 20KHz
- –10dB response 50Hz - 20KHz
- Max SPL long-term 127dB
- Max SPL Peak 130dB
- Crossover Points 1.1 kHz
- High Frequency Compression Driver
- Number of Drivers 1
- Diaphragm Size 3 “ (76mm)
- Throat Exit Diameter 1.4 “ (35mm)
- Phase Plug Three slot radial
- Diaphragm Material Nitrate VPD Treated Titanium
- Former Material Nomex
- Former Design Direct Drive Bent Former
- Magnet Type Neodymium
- High Frequency Horn Design
- Horizontal Coverage 80° 1kHz to 10kHz avg.
- Vertical Coverage 40° 1kHz to 10kHz avg.
- Type Constant Directivity
- Overall Dimensions 10.60” x 10.60” (270mm x 270mm)
- Mouth Size 7.48” x 7.48” (190mm x 190mm)
- Throat size 1.4” (35 mm)
- Low Frequency Section
- Number of Drivers 1
- Acoustic Design Front Loaded, Bass Reflex
- Woofer Size 12.00”(304mm)
- Voice Coil Diameter 2.50"(63mm) Inside/Outside Epoxy Baked
- Wire Type Copper Clad Aluminum
- Diaphragm Material Epoxy-reinforced Cellulose
- Magnet Type Neodymium
- Magnetic Circuit Active Impedance Control
- Second Static Voice Coil Yoke Mounted - Copper Clad Aluminum
- High Frequency Amplifier Specifications
- Type Class AB – Push Pull – Low Intermodulation Design
- Metal Oxide Silicon Field Effect Transistor (MOSFET) output stage
- Transformer Balanced Speaker Output
- Rated Continuous Power 50 Watts
- Distortion <.05% THD
- Operating Bandwidth 1.5kHz – 30kHz
- Cooling Passive – aluminum heatsink
- Forced Ventilation High-capacity fan (demand sensitive)
- Power Supply Iron core toroidal transformer
- Bass Amplifier Specifications
- Type High-efficiency, Current-enhancing Switch Mode technology with Linear Active Filter
- Rated Continuous Power 450 Watts
- Distortion <.05% THD
- Operating Bandwidth 20Hz – 2kHz
- Cooling Passive – aluminum heatsink
- Forced Ventilation High-capacity fan (demand sensitive)
- Power Supply Iron core toroidal transformer
- Line input Power
- US 115VAC, 60Hz
- Recommended amperage service 8 Amps
- AC Connector Neutrik Powercon™ NAC3MPA Connector (Included)
- Europe 230VAC, 50Hz
- Recommended amperage service 5 Amps
- AC connector Neutrik Powercon™ NAC3MPA Connector (Included)
- Control Panel
- System Level Control Rotary control (-6db to +6db)
- Monitoring Position Filter 2-position push-button ON / OFF switch
- System Status LED Indicators Green / Red - Power ON / Peak
- Green / Red – Signal Present / Thermal Condition
- ON / OFF Switch 2-position rocker switch
- Signal Input
- Main Signal Input Connector Male XLR
- Signal Impedance 20 KOhms (Balanced Signal)
- Through Signal Output Female XLR
- EX10 Electronic System Controls Electronic band pass crossover filters
- Phase alignment
- Time correction
- Equalization
- Limiting and control of individual amplifier system’s RMS output
- Power supply and amplifier thermal protection
- Construction Features
- Basic Geometric Design Asymmetrical Geometry
- Material 15mm Exterior Grade Baltic Birch
- Finish Ultra wear-resistant black polymer coating
- Hardware One (1) Each Recessed Top Handle
- One (1) Each Recessed Side Handle
- One (1) Each “M10” Top Hang Point
- Omnimount bracket points on Top and Side
- Two (2) Each Integrated “M10” Side Hang Points
- One (1) Each 1.375” (35mm) Pole Mount
- Mount Points Omnimount bracket points on Top
- Two (2) Each Integrated “M10” Side
- Hang Points One (1) Each 1.375” (35mm) Pole Mount
- Grill Acoustically Designed Perforated Metal with Weather-Resistant Polymer Coating
- Physical
- Height 23.46” (596mm)
- Width 14.48” (368mm)
- Depth 14.48” (368mm)
- Weight 60 lbs. (27kg)
Features
- High-output, extreme resolution, compact full-range speaker system
- 127 dB sustained output with very high dynamic range and low noise floor
- Integrated active amplification and control electronics with 500 total watts of power
- Complete, on-board speaker system management including equalization, time correction, crossover filters, amplifier overdrive protection, system set-up and output level controls
- Very high quality 50-watt, low IM distortion Class A/B high frequency amplifier with transformer-balanced output provides comprehensive distortion control under clipping conditions
- 450-watt high current, high-efficiency low frequency amplifier delivers high output bass with total control.
- Compact asymmetrical trapezoidal cabinet design allows for use in stage monitor or under balcony applications.
- New, state of the art 3.00” (76mm) diaphragm titanium compression driver features the first diaphragm to be treated with a Nitrate Vapor Particle Deposition (VPD) process that dramatically improves the dome’s resonance and dampening characteristics lowering distortion and extending frequency response. The driver features the largest neodymium motor in use today providing absolute control of the diaphragm assembly.
- Wide dispersion (80° horiz. x 40° vert.)
- Floor Monitoring Filter precisely adjusts equalization and phase response characteristics providing optimized monitoring performance.
- Twelve-inch woofer with revolutionary Active Impedance Control (AIC) voice coil technology and neodymium magnetic motor structure dramatically increases force, lowers distortion and provides increased frequency response linearity.
- Professional, Baltic birch construction with wear resistant polymer coating
- Proprietary top/side handle design for simplified handling and carrying integrates one M10 hang points, OmnimountTM bracket point and four M6 bracket points
- Two side-mounted M10 hardware points
- Top hat for pole mounting applications
- Accessories
- EX2.2 Active Bass Module
- The EX12 can be combined with an EX2.2 Active Bass Module in order to create a formidable, very high output audio system. The EX2.2 is comprised of two 12-inch woofers and features on-board amplification and control electronics with 1000 watts of total power and can be easily connected to the EX12 through the internal control electronics.
- EX2.5 Active Bass Module
- The EX12 can be combined with an EX2.5 Active Bass Module double 15-inch systems as well. The EX2.5 is comprised of two 15-inch woofers and features on-board amplification and control electronics with 1600 watts of total power and can be easily connected to the EX12 through the internal control electronics.
- EX12-HBracket
- A horizontal U-bracket designed for use with the two side-mounted M10 hang points.
- EX12-VBracket
- A vertical U-bracket designed for use with the top handle located M10 hang point. The kit includes a special mounting plate with integral M10 attachment point that replaces the lower top hat assembly.
- WBX 60.0
- Omnimount Compatible
Related Products
