Pro Audio Systems

• Technical Specifications

• Drive Unit
• The high power handling 150mm (6.00”) version of Tannoy’s exclusive point source, constant directivity Dual Concentric™ drive unit technology, with it’s reinforced paper cone LF, twin roll cambric surround and 25mm (1.00”) titanium domed, neodymium magnet system HF, ensures high power output with high sensitivity.
• With the HF mounted in the throat of the LF driver these two sources are coincidentally aligned into a single point source. This is a configuration, exclusive to the Dual, delivers a smooth and uniform frequency response over a wide area. The CAD designed Tulip WaveGuide™ combines 90º conical dispersion for optimum coverage, forward gain and excellent acoustic impedance characteristics.
• Speaker placement flexibility is enhanced by the dispersion characteristics of the Dual driver; allowing either vertical or horizontal mounting without any compromise to sound quality or acoustic performance.
• System Type Full Range - Vented
• Frequency Response (-3dB) (1)
• Full Range Mode 85Hz - 35kHz
• Frequency Range (-10dB) (1)
• Full Range Mode 78Hz - 45kHz
• Frequency Response (-3dB) (1)
• High Pass Mode 120Hz - 35kHz
• Frequency Range (-10dB) (1)
• High Pass Mode 100Hz - 45kHz
• Rated Maximum SPL (2) Average: 107dB
• Peak: 113dB
• Dispersion (-6dB) 90 degrees conical
• Driver Complement 150mm (6.00”) Dual Concentric™
• Crossover Passive 1.6kHz
• Directivity Factor (Q) 5.6 averaged 1kHz to 10kHz
• Directivity Index (DI) 7.0 averaged 1kHz to 10kHz
• Distortion 10% Full Power (8.9V)
• 2nd Harmonic
• 250Hz: 2.64%
• 1kHz: 0.22%
• 10kHz: 1.87%
• 3rd Harmonic
• 250Hz: 0.31%
• 1kHz: 0.45%
• 10kHz: 0.29%
• 1% Full Power (2.8V)
• 2nd Harmonic
• 250Hz: 0.63%
• 1kHz: 0.06%
• 10kHz: 0.78%
• 3rd Harmonic
• 250Hz: 0.31%
• 1kHz: 0.23%
• 10kHz: 0.26%
• Crossover 1.6kHz Passive
• Construction
• Enclosure 11.3 litre vented and internally braced MDF enclosure
• Finish Textured black or white paint with custom colours on request
• Powder coated steel grille with reticulated foam behind
• Connectors 1 x female XLR (input)
• 1 male XLR (link)
• 1 x Neutrik Powercon
• Controls & Indicators Level Control
• Power LED (Blue)
• Signal LED (Green)
• Limit LED (Red)
• Full range / High pass switch (110Hz)
• Power Switch
• Fittings 4 x M6 bracket inserts
• 2 x M6 yoke bracket inserts
• Dimensions (HxWxD) 334 x 240.80 x 235mm
• (13.15 x 9.48 x 9.25”)
• Weight 8.50kg
• (18.70lbs)
• Electronics
• Maximum signal input for clip Input attenuator at minimum:
• +18dBu
• Input attenuator at maximum:
• +5dBu
• Output noise -105dB unweighted, referenced to maximum output (22kHz bandwidth)
• Efficiency >90% typically
• Damping Factor 400 ref 8 Ohms
• Distortion <0.05% @ 1kHz -3dB output (22kHz bandwidth)
• Input Impedance 5.6kOhm unbalanced
• 11.2kOhm balanced
• Protection systems
• Over Current Excessive over current causes shutdown
• Temperature Limiters applied
• Brownout Automatic protection & recovery
• Mains Inrush current limiting
• Indicators 1x Limit LED
• 1x Signal LED
• 1x Power LED
• Number of channels One
• System Type Class D
• PSU Specifications
• Input Connector Locking Neutrik Powercon
• Voltage Selection Automatic (115 / 230V, 45 - 65Hz)
• Type High current, high frequency switch mode
• Efficiency >90% typical
• Input voltage 100v / 115v / 230v nominal
• +/-10%
• Mains fuse External
• Fuse type T10AT
• Other features Automatic soft start

• Features

• Delivering impressive levels of accuracy and performance, the POWERV6 is equipped with a highly efficient, flexible and reliable Class D power amplifier incorporating a switching power supply. The amplifier section and power supply were developed simultaneously and therefore optimally matched to minimise noise and enhance stability. The power module combines light, efficient and cool-running amplification, comprehensive driver protection and equalisation into a single compact unit. Clean, undistorted sound is delivered, even when driven at very high power levels. No cooling fans are required so the system runs quietly and is not prone to internal dust contamination.
  
• The POWERV6 capitalises on the integrated design concept as every component part and their interaction is fully optimised. All signal processing functions have been precisely tailored; crossover frequencies and slopes, EQ, phase corrections and limiting.
  
• LED’s on the rear panel indicate signal presence, signal activity, and power. Signal input and audio link are via XLR, while the mains connector is a Neutrik locking Powercon type.
  
• A switch on the rear panel of the full range models allows selection between Full Range or High Pass modes, with High Pass allowing a speaker to be mounted in close proximity to a boundary or simply to increase headroom. High pass mode also enables a simple top box and subwoofer combination to be created without the need for an external crossover. Two low pass setting options on the subwoofer amplifiers fully optimise integration with the full range units.
  
• Available in black or white, the asymmetric cabinet profile is flexible and discreet in either fixed installations or on the road. Used as a low profile stage monitor, the conical coverage pattern gives the performer greater freedom of movement off axis than allowed by conventional horn loaded designs.

Related Products

No related products found.